Cornices

Cornice 1

Cornice 1

Cornice 2

Cornice 2

Cornice 3

Cornice 3

Cornice 4

Cornice 4

Cornice 5

Cornice 5

Cornice 6

Cornice 6

Cornice 7

Cornice 7

Cornice 8

Cornice 8

For the perfect complement of kitchen furniture and the addition of a neat, finished appearance, at the last stage of installation work on the upper base of the hanging cabinets and the lower part of the floor cabinets are selected such selective elements as the base and ledges. Depending on the class of kitchen furniture (premium, economy, etc.), such elements can be made both of wood or chipboard, or plastic with a coating that imitates the color and structural drawing of natural materials.

A bent base for kitchen furniture

How make a bent base in the kitchen? Currently, there are two main options for implementing such a thing. The first and most optimal is the ordering of all necessary PVC elements in a reliable company specializing in furniture production. Such bases can be of any shape, but due to the competent approach of color and imitation of the structural pattern, outside they aren’t different from natural materials.

With the PVC base you can perfectly complement the bottom of the kitchen set with any design features. In addition, such components are inexpensive, do not require difficult care and do not lose their original appearance for many years.

If it is a premium class kitchen, then the use of PVC base is inappropriate. In this case, plywood products are more suitable, the required form is provided by specialists with the help of special equipment. Such a base looks very beautiful and thanks to a special treatment, it has no difference from the array of expensive trees.

The second option is to create a beautiful base for kitchen furniture - an independent work with the use of appropriate materials. It is worth mentioning that in this case it is necessary not only to have a great practical experience, but also to have a sufficiently large set of professional equipment.

The upper ledge of the kitchen furniture. How to install?

To correctly and beautifully arrange the distance between the top of the kitchen furniture and ceiling today, special ledges are used, the shape and design of which are fully consistent with the basic style used to create hanging cabinets. Depending on the customer's preferences, such elements may have carved pictures on the surface with any degree of difficulty and virtually any color.

When the cornices are complete with furniture, then their installation, as a rule, does not cause difficulties. On the basis of such elements there are already provided holes for mounting and you only need to gently fix them on the surface of the furniture. If, however, the ledges are made to order separately from the furniture, depending on the features of their construction fixation can be made as follows:

In the setup, at an even distance from each other, drill the holes for mounting.

Tightly press the ledge to the top of the furniture and gently fix it using screws.

If the distance between the ceiling and the top of the furniture does not allow to fix from above, it is possible to drill holes from the inside of the cabinet and tighten the ledge from below through the lid.

Before starting the work, be sure to pre-place all the elements of the curtain on the furniture to make sure that they will be installed in the correct sequence.

About as

Armadio is the special project of LLC "MDVD" for a production of individual kitchens to order

mdvd

Why Armadio?

Experience more than 10 years.


High quality


Open prices.

Contacts

4ROOM Shopping Center (-1 floor, 132), Ukraine, 08130, Kyiv,
Petropavlovskaya Borschagivka,
st. Petropavlovskaya, 6

+38 (095) 746 4811
+38 (044) 206 3639
+38 (099) 666 8624